Nikon DX-TL4516E Bedienungsanleitung PDF herunterladen (Seite 18)

Search by Alarm List

This unit stores the start time of alarm recording and

emergency recording in the alarm list when such recording

begins. This item is used to search the desired picture using

the list of alarm recording (emergency recording). The search

result displays in still frame playback of the single screen

display.

steps

1, 2

step

Search by Alarm List

Alarm List

User Menu

step

1. Set the month, date, year, hour, minute, second,

and sensor number to be searched.

Latest: Displays the date and time of the latest

recording.

step

2. Select “Alarm List.”

The alarm list may take longer time to display completely

when there are many items in the list.

The displayed alarm list shows the list of alarm recordings

which have been started before and closest to the

speciﬁed time.

step

3. Select the alarm list you want to display.

To change the source device to be searched, set the de-

sired device in the <Select Source Device>. (User Menu

Search)

To execute alarm list search while the “Alarm area” and

“LPA area” are set, set the playback area to “Alarm” and

“LPA” respectively.

“Sensor” display indicates the sensor number to which

the alarm signal is input.

When repeat recording setting for normal and alarm areas

are set to “Repeat Off” and there is an alarm recording

(emergency recording) at the end of the HDD, that

recording may not be stored in the alarm list and that item

may be missed.

When the data of the camera number which is not

corresponded to the alarm sensor number is copied to the

external media, the alarm list of that data is not exactly

similar to that of listed in the digital recorder.

When the detection of the motion or the ground of the

ALARM IN terminal occurs numerously at the same time,

not all the start times of the alarm recording may be

registered in the alarm list. In this case, the sensor of the

lowest number is registered in the list.

In the alarm list, items with the ALARM IN terminal

grounded are indicated in orange, items that were

detected with motion are indicated in white, items with

the EMERGENCY terminal grounded are indicated in

magenta, and items that were input with alarm signal via

communication are indicated in green.

To clear the alarm list, erase the HDD data of which the

alarm recording is recorded (System Menu

Data Clear).

Beware that executing it erases all the data of the HDD

containing the picture data.

Alarm list search is not performed if there are no index

signals.

When alarm recording (emergency recording) is started

while displaying the <Alarm List>, you must ﬁrst exit the

<Alarm List> and then display it again. The new item is

added to the list. In this case, you may have to specify the

date and time to be searched again.

For alarm list search of LPA area, the list from the start

point of media is displayed when selecting “To latest,”

and the list from the end point of media is displayed when

selecting “ To oldest.”

Searching the desired picture (continued)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon DX-TL4516E Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto DVR Nikon DX-TL4516E