Nikon DX-TL4516E Bedienungsanleitung PDF herunterladen (Seite 16)

Basic playback

This function is used to playback recorded data. This unit

allows recorded data to be played back using various

methods. The basic playback described below is the most

common method for playback.

step

1. Press the PLAY button inside of the front door.

• Playback starts.

• After turning the power on, the oldest recording

data is played back first. Otherwise, playback

resumes at the stopped position of the previous

playback spot.

STOP

PAUSE

REV. PLAY

PLAY

JUMP TO END SPEED

When the “Playback Device Repeat Setting” is set to

“Repeat Off,” playback stops when reaching the physical

end of the HDD or end point of the recording section.

When the “Playback Device Repeat Setting” is set to

“Repeat On,” recorded data is played back repeatedly.

(System Menu

Memory Recording Data Readout

Setting)

[To change the playback device:]

step

-1

. Select the playback device and playback area in the

<Select Source Device>. (User Menu

Search)

Main: Plays back the contents from the main HDD

device.

Normal: Normal recording area

Alarm: Alarm recording area

LPA: Long pre-alarm recording area

Copy 1: Plays back the recorded contents of the

copy 1 device.

“SerialBus,” “DVD/CD,” “USBmemory”

Copy 2: Plays back the recorded contents of the

copy 2 device.

“Internal,” “SerialBus,” “DVD/CD”

“Alarm” appears when “Alarm Recording Area” is set

to other than “0 %.” (System Menu Memory Data

Management Setting for Main Memory)

“LPA” appears when “Long Pre-Alarm Area” is set to

other than “0 %.” (System Menu Memory Data

Management Setting for Main Memory)

step

-2

. Press the PLAY button.

• Playback of the selected device starts.

When you press the PAUSE/JUMP TO END button during

the playback is stopped, the still frame playback picture

around the end point of the latest recording is displayed.

step

3. To pause playback, press the PAUSE button.

• To resume playback, press the PAUSE button

again or press the PLAY button.

step

4. To stop playback, press the STOP button.

• When executing playback again, the playback

starts from the stopped position of the previous

playback.

Pressing the OUTPUT A/B button on the front panel

switches the multiplexer video output. When OUTPUT A is

selected, the button light indicator is off. When OUTPUT

B is selected, the button light indicator is on, and the

buttons related to playback function are operated for the

monitor screen connected to the OUTPUT B connector.

Pressing the OUTPUT A/B button again switches the

multiplexer output to OUTPUT A.

The playback of each camera may not be executed at a

constant speed depending on the recorded condition.

During the split screen display, the playback speed may

be slower than the speed used for recording.

When playing back on both OUTPUT A and B, the

playback speed may be affected and become slower.

Playing back the recorded data

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon DX-TL4516E Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto DVR Nikon DX-TL4516E