Nikon CL L2 Bedienungsanleitung PDF herunterladen (Seite 17)

The Fantasea FL-3 and FL-4 housings require only a minimum

amount of care for reliable performance. The following are tips

that will enable you to get the best results.

Always rinse your housing with a strong stream of fresh water

and if possible soak your housing in fresh water tub or rinse

tank for about 20 minutes after every dive in order to dissolve

the salt water crystals from around the controls and openings

of the housing. Manipulate each of the movable controls to

assist the removal of salt particles from these tight areas.

Care & Maintenance:

Allow the housing to dry thoroughly before packing away for

the day or for the trip home. You may use a soft towel or cloth

to dry the housing. Be sure there is no grease or other debris

on the towel.

Camera Standby Mode:

You can access the camera's menu to choose how long a period

of inactivity before the camera goes into standby mode. Options

are 30 seconds, one minute, five minutes, and 30 minutes. This

feature allows you to conserve battery power by placing the LCD

monitor on standby [sleep mode]. It is recommended that this

option is set for 30 seconds for the following reasons: to conserve

battery power and longer periods of time will cause a warming

of the LCD screen. This will cause heating of housing and this

can produce condensation and fogging of the lens port. If this

occurs and the condensation appears on the lens port then it will

have a negative impact on the quality of the images taken.

When you want to resume shooting, pressing any button will re-

activate the camera. However, if after the camera goes into standby,

a further period of three minutes goes by without any activity,

the camera will turn off [deep sleep mode]. You can turn it back

on by pressing and holding the triangular icon button--

Review/Restore [Playback] for about five seconds. The Welcome

to Nikon Coolpix screen will appear then it will display last image

taken. One additional press of the Review button will then return

the camera to active shooting mode.

1 2 ... 12 13 14 15 16 17 18 19

Keine Kommentare

Nikon CL L2 Bedienungsanleitung Seite 17