Nikon COOLPIX S9600 Bedienungsanleitung PDF herunterladen (Seite 205)

Technical Notes and Index

F9

Camera turns off

without warning.

• The camera automatically turns off to save

power (auto off function).

• The camera or battery has become too

cold and cannot operate properly.

• The inside of the camera has become hot.

Leave the camera off until the inside of the

camera has cooled, and then try turning it

on again.

• The camera turns off if the USB cable

connecting it to a computer or printer is

disconnected. Reconnect the USB cable.

21

F3

–

83, 86,

E22

Monitor is blank.

• The camera is off.

• The camera has entered standby mode to

save power. Press the power switch,

shutter-release button, c button, or b

(e movie-record) button, or rotate the

mode dial.

• The flash lamp flashes while the flash is

charging. Wait for the flash to charge.

• The camera and computer are connected

via the USB cable.

• The camera and TV are connected via an

HDMI cable.

• The camera and smart device are

connected using Wi-Fi connection and the

camera is operated by remote control.

20

1, 21

45

83, 86

83,

E20

80

Monitor is hard to read.

• Adjust the monitor brightness.

• The monitor is dirty. Clean the monitor.

78,

E65

F6

Date and time of

recording are not

correct.

• If the camera clock has not been set, the

“Date not set” indicator flashes during

shooting and movie recording. Images

and movies saved before the clock is set

are dated “00/00/0000 00:00” or “01/01/

2014 00:00” respectively. Set the correct

time and date from the Time zone and

date option in the setup menu.

• The camera clock is not as accurate as

ordinary watches or clocks. Periodically

compare the time of the camera clock

with that of a more accurate timepiece

and reset as required.

16, 78,

E63

Problem Cause/Solution A

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 225 226

Kommentare zu diesen Handbüchern

Keine Kommentare