Nikon FM2 Bedienungsanleitung PDF herunterladen (Seite 44)

Flash photography

A Nikon electronic flash unit will prove very convenient for

indoor or nighttime shooting or for use in the daytime as sup

plementary lighting. The FM2's built-in hot-shoe contact (g)

enables direct mounting of the Nikon SB-27, SB-26, SB-25,

SB-24, SB-22, SB-20, SB-19 or SB-16B Speedlight, requiring

no special connecting cords. When shooting with a flash unit,

you should determine the aperture setting that corresponds to

the shooting distance after checking the guide number of the

electronic flash unit or flashbulb in use. Also, if the speedlight

requires the use of a connecting cord, insert the cord into the

camera body's sync cord terminal @. Since the FM2's hot-

shoe contact becomes active only when an electronic flash unit

is mounted, touching it accidentally is harmless.

The use of flash units not provided with a hot-shoe contact* is

not recommended because accidental firing is likely to occur

due to short circuiting at the contact. When using such flash

units, seal the hot-shoe contact on the camera body with vinyl

tape or something appropriate to insulate it.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 77 78

Keine Kommentare

Nikon FM2 Bedienungsanleitung Seite 44