Nikon FM2 Bedienungsanleitung PDF herunterladen (Seite 41)

Multiple exposure lever @

Taking a picture of different subjects or two or more of the same

subject on the same frame means multipie exposure. To make a

multiple exposure, observe the following:

1) Take the first shot. (Press the shutter release button.)

2) Pull the multiple exposure lever in the direction of the arrow

shown in the photo, as you wind the film advance lever fully.

The frame counter will not advance; only the shutter is ready

to be released again. Although the finger pulling the multiple

exposure lever will automatically slip off the lever as the film

advance lever is wound, multiple exposure operation will

have been performed correctly,

3) After winding the film advance lever fully, take the second

shot.

To take three exposures or more on the same frame, repeat the

procedures described in 2) and 3).

Note: In multiple exposure photography, the FM2 is designed to reduce

film dislocation to the minimum. But It may occur due to film curling, film

slack or inappropriate film winding.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 77 78

Keine Kommentare

Nikon FM2 Bedienungsanleitung Seite 41