Nikon EL2 Bedienungsanleitung PDF herunterladen (Seite 42)

Automatic Shutter Speed Selection

When set to the “A” shutter-speed dial setting, the EL2

is capable of fully automatic selection of the shutter

speed appropriate for the aperture setting of the lens

and the existing lighting conditions. The exposure meter

display, visible within the viewfield of the finder, en

ables the photographer to maintain continuous control

over the exposure while viewing and focusing, and with

out the need of removing the eye from the viewfinder.

And as lighting conditions (or the aperture setting)

change, the shutter speed control circuit continues to

maintain continuous and automatic control, for perfect

exposure every time.

To take a picture using automatic shutter speed selec

tion, first set the shutter-speed dial to “A” (the green

needle in the finder will move to the upper “A” posi

tion and remain) and select an appropriate aperture set

ting. As you compose and focus, the black needle will

continuously indicate the shutter speed being selected

for correct exposure. Prior to exposing the film, verify

that the needle is indicating a shutter speed appropriate

for the subject; if the indicated speed is too fast or too

slow, simply adjust the aperture ring on the lens until

the desired shutter speed is indicated. Then, press the

shutter release button to expose the film. Note that as

long as the needle remains within the scale, provided the

EV range of the metering system is not exceeded, the

camera provides the correct exposure automatically.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 74 75

Keine Kommentare

Nikon EL2 Bedienungsanleitung Seite 42