Nikon Nikon 1 AW1 Bedienungsanleitung PDF herunterladen (Seite 75)

To prevent water falling into the camera when the covers are

opened, hold the camera so that the covers open down-

wards.

Remove the lens.

The O-Ring

The camera uses an O-ring to form a watertight seal. Improper

handling of the O-ring can produce leaks. Check the condition of

the O-ring as described below whenever the camera has been used

under water or whenever foreign matter is found on the O-ring

when the lens is removed.

Remove the O-ring.

After confirming that the lens and

camera are dry, detach the lens and

gently wipe the lens O-ring seal with a

soft, dry cloth to remove any foreign

objects. Note that there may still be

water between the camera and the

lens; to prevent water falling onto the

dust shield or lens when the lens is

detached, keep the camera flat and

remove the lens slowly.

Lightly stretch the O-ring by sliding

your fingers along either side and

remove it from the camera (you can

also use an optional O-ring remover;

0 108). Do not apply excessive force

or use your fingernails, metal objects,

or edged or pointed tools.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 143 144

Keine Kommentare

Nikon Nikon 1 AW1 Bedienungsanleitung Seite 75