Nikon Nikon 1 AW1 Bedienungsanleitung PDF herunterladen (Seite 77)

Re-insert the O-ring.

After making sure that O-ring and

guide are free of foreign objects, place

the O-ring so that it runs evenly at the

same level all the way round the O-

ring guide, without undue stretching

and without protruding from the

guide.

O-Rings

The O-ring requires periodic replacement. Replace the O-ring immedi-

ately if it is damaged, cracked, warped, or has lost its elasticity. O-rings

should be replaced at least once a year even if the product has not

been used; use only O-rings designated for use in this product. O-rings

must be greased before use and whenever the surface appears dry; fail-

ure to observe this precaution could result in the O-ring cracking and

water entering the camera.

Silicon Grease

Coating the O-ring with the supplied silicon grease prevents wear and

ensures that the lens rotates smoothly. Use only the supplied silicon

grease or optional WP-G1000 silicon grease (0 108); failure to observe

this precaution could result in O-ring becoming stretched or otherwise

deformed. Replacement O-rings and silicon grease can be purchased

from a Nikon camera retailer or Nikon-authorized service representa-

tive. Do not use grease in excessive amounts or apply using paper or

cloth, as this may cause dust or fibers to adhere to the O-ring, making

the product vulnerable to leaks.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 143 144

Keine Kommentare

Nikon Nikon 1 AW1 Bedienungsanleitung Seite 77