Nikon Nikon 1 AW1 Bedienungsanleitung PDF herunterladen (Seite 37)

Detaching the Waterproof Lenses

Be sure the camera is off when removing

or exchanging lenses. To remove the lens,

press and hold the lens release button

(q) while rotating the lens as shown (w)

and then detach the lens from the cam-

era. After removing the lens, replace the

lens caps and camera body cap.

Attaching and Removing Waterproof Lenses

Before attaching or removing a waterproof lens, be sure the lens

and camera are completely dry, that the O-ring is not cracked, dam-

aged, twisted, or out of position, and that the camera O-ring and

lens O-ring seal are free of hair, dust, sand, and other foreign

objects. Do not exchange lenses when your hands are wet or have

salt on them or in areas exposed to wind, spray, dust, or sand, and

be careful that water does not drop into the interior of the camera

or lens.

Silicon Grease

The O-ring can be lubricated with the

supplied silicon grease or with optional

WP-G1000 silicon grease, preventing

wear and making waterproof lenses eas-

ier to attach and remove (0 108). To

apply, place a bead of grease in a plastic

bag and use your fingers to spread the

grease throughout the bag (q), then

insert the O-ring and massage the bag to

coat the ring (w). Use only silicon grease

designated for use with this product. Failure

to observe this precaution could result in

O-ring becoming stretched or otherwise deformed.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 143 144

Keine Kommentare

Nikon Nikon 1 AW1 Bedienungsanleitung Seite 37