7 Press I to scroll through the screen, select Next, and press the k button.
• The screen shown on the right is displayed on the camera.
• The status lamps flash red and green alternately while the camera is waiting to be paired.
On your smart device,
go to the app store and
search for SnapBridge
360/170. After installing,
open the SnapBridge
B If You Are Using Y NFC
Before selecting Next in step 7, touch the NFC antenna of the smart device to the Y (N-Mark) on the
camera. The SnapBridge 360/170 app on the smart device launches, and when Camera name acquired.
Connect? is displayed on the screen, select OK. Proceed to step 10.
• Enable the NFC setting on the smart device in advance.
• After installing the SnapBridge 360/170 app, close all apps that use NFC (including the
SnapBridge 360/170 app). Pairing may fail if apps that use NFC are running.
8 Launch the SnapBridge 360/170 app on the smart device.
9 When the screen shown on the right is displayed on the smart device, tap the
camera name.
Connect to Camera
Camera name
KeyMission 170_xxxxxxxx
10 Check the authentication code.
• Confirm that the camera and smart device display the same
authentication code.
• Perform the following operations on the camera and smart device at the
same time.
- On the camera, press I to scroll through the screen, select OK, and
press the k button.
- On the smart device, tap Pairing (the name of the button varies with
the smart device).
device and select OK.
Auth. code
000000
OK
Back
11 Follow the on-screen instructions to complete the pairing process.
• Camera: If pairing is successful, the screen shown on the right is displayed. Press I to
scroll through the screen, select Next, and press the k button. Then follow the on-
screen instructions.
• Smart device: Follow the on-screen instructions.
Your camera and
smart device are
connected!
SnapBridge will send
your photos to your
When You Cannot Pair
Perform the following and then pair again by proceeding to “Pairing Procedure”.
• Press and hold the movie button on the camera for at least three seconds to turn off the camera.
• Close the SnapBridge 360/170 app.
If the language selection dialog is not displayed when the camera is turned on, perform pairing by following the
procedure described in “If You Select Later” in step 6.
To Learn More About Using the SnapBridge 360/170 App
See the online help (tap Other M Info/settings M Instructions in the app).
Trademark Information
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Nikon Corporation is under license.
• Android and Google Play are trademarks or registered trademarks of Google Inc. The Android robot is
reproduced or modified from work created and shared by Google and used according to terms described in the
Creative Commons 3.0 Attribution License.
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern