206 Technical Notes
Exposure
Metering system TTL metering using camera image sensor
Metering mode • Matrix metering
• Center-weighted metering: Weight of 75% given
to 12mm circle in center of frame; weighting
can instead be based on average of entire
frame
• Spot metering: Meters 4mm circle (about 1.5%
of frame) centered on selected focus point
• Highlight-weighted metering
Range (ISO 100, f/2.0 lens,
20 °C/68 °F)
• Z7: –3 – +17 EV
• Z6: –4 – +17 EV
Mode Auto (b); programmed auto with flexible
program (P); shutter-priority auto (S); aperture-
priority auto (A); manual (M); user settings (U1,
U2, U3)
Exposure compensation –5 – +5 EV in increments of
1
/
3 or
1
/
2 EV available
in modes P, S, A, and M
Exposure lock Luminosity locked at detected value
ISO sensitivity
(Recommended Exposure
Index)
• Z7: ISO 64 – 25600 in steps of
1
/
3 or
1
/
2 EV. Can
also be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO
32 equivalent) below ISO 64 or to approx. 0.3,
0.5, 0.7, 1, or 2 EV (ISO 102400 equivalent)
above ISO 25600; auto ISO sensitivity control
available
• Z6: ISO 100 – 51200 in steps of
1
/
3 or
1
/
2 EV. Can
also be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO
50 equivalent) below ISO 100 or to approx. 0.3,
0.5, 0.7, 1, or 2 EV (ISO 204800 equivalent)
above ISO 51200; auto ISO sensitivity control
available
Active D-Lighting Can be selected from Auto, Extra high, High,
Normal, Low, or Off
Multiple exposure Add, average, lighten, darken
Other options HDR (high dynamic range), photo mode flicker
reduction
Kommentare zu diesen Handbüchern